Skip to content

P0423

Powertrain
Low

Heated Catalyst Efficiency Below Threshold Bank 1

What could P0423 mean for your vehicle?

Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.

Next: review your vehicle and symptoms. Your code carries over. No account needed to start.

P0423 means the heated catalyst on bank 1 (the side with cylinder 1) is no longer cleaning the exhaust well enough. A heated catalyst has an electric heating element ahead of the catalyst so it starts working sooner after a cold start, instead of waiting for exhaust heat. They are uncommon and fitted to only a small number of engines.

The computer judges the heated catalyst the same way it judges any catalyst. When the result drops below the limit, it sets P0423. The cause can be a worn or contaminated catalyst, a heater that no longer warms it in time, or a sensor that misreads the result.

Driving is normally unaffected, but the vehicle will fail an emissions inspection. Because the heated catalyst is an expensive part, confirm the heater circuit and sensors before replacing it.

Severity

Low — MonitorThis Month

Symptoms

  • •Check engine light on
  • •Failed emissions inspection
  • •Usually no change in how the vehicle drives
  • •Higher emissions just after a cold start

Likely Causes

Heated catalyst aged or poisonedMost common

Like any catalyst, the heated one loses its ability to clean exhaust with age, or after oil, coolant or rich running contaminates it.

Catalyst heater not workingCommon

If the electric heating element or its supply fails, the catalyst warms up too slowly and the computer sees poor efficiency after a cold start.

Faulty sensor used for the efficiency checkCommon

A slow or failed oxygen or exhaust sensor downstream can make a good catalyst look weak.

Estimated Cost

DIY Repair

$100–$1500
Difficulty
Shop OBD2 scanners

Professional Repair

$300–$3500

Includes parts + labor

Common Fixes

  1. Test the heated catalyst's heater circuit and its fuse or relay
  2. Check the downstream oxygen or exhaust sensors for slow response
  3. Replace the heated catalyst if it is confirmed worn out

Shop Parts

Related Codes

Still have questions about P0423?

Continue with P0423

Next: add your vehicle and symptoms. Your code carries over.