Skip to content

P0316

Powertrain
Moderate

Engine Misfire Detected on Startup (First 1000 Revolutions)

What could P0316 mean for your vehicle?

Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.

Next: review your vehicle and symptoms. Your code carries over. No account needed to start.

P0316 means the engine computer counted too many misfires in the first 1,000 crankshaft revolutions after the engine started. Emissions rules treat startup misfire separately, so this code often appears alongside P0300 or a cylinder-specific code such as P0301.

A misfire that only shows up on a cold start points to things that get better as the engine warms. The usual suspects are water in the spark plug wells, coils that arc when damp, injectors that drip after shutdown and worn plugs. Ford has traced some cases on its 2.7 EcoBoost to engine software or leaking direct injectors.

Fix it soon. Repeated rich, misfiring starts can wash oil off the cylinder walls and damage the catalytic converter.

Severity

Moderate — Address SoonThis Week

Symptoms

  • •Check engine light on, usually with P0300 or a cylinder code
  • •Rough running right after a cold start that smooths out once warm
  • •Delayed start or fuel smell at startup

Likely Causes

Moisture in the spark plug wells or coils arcing when coldMost common

Water in the plug wells, often from a blocked drain or leaking valve cover seal, makes coils arc on a cold, damp start.

Leaking fuel injectorsCommon

Injectors that drip after shutdown flood a cylinder and cause a rich, rough start.

Worn or fouled spark plugsCommon

Plugs that only fire cleanly once warm misfire in the first few hundred revolutions.

Wrong temperature sensor reading or engine softwareLess common

A bad coolant temperature reading or a known software issue can upset cold-start fueling.

Estimated Cost

DIY Repair

$30–$300
Difficulty

DIY Friendly

Shop OBD2 scanners

Professional Repair

$120–$1300

Includes parts + labor

Common Fixes

  1. Check the spark plug wells for water or oil and fix the source
  2. Replace worn spark plugs and any coil with arcing marks
  3. Test injectors for leakage after shutdown
  4. Check for an engine software update from the manufacturer

Shop Parts

Related Codes

Still have questions about P0316?

Continue with P0316

Next: add your vehicle and symptoms. Your code carries over.