Skip to content

P0192

Powertrain
Moderate

Fuel Rail Pressure Sensor A Circuit Low

What could P0192 mean for your vehicle?

Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.

Next: review your vehicle and symptoms. Your code carries over. No account needed to start.

P0192 means the fuel rail pressure sensor circuit is reporting a low signal to the engine computer. The computer uses that sensor to monitor how much pressure reaches the injectors.

A bad sensor or a wiring fault is the most common cause. Real low fuel pressure from a weak pump or restricted supply can also set it. Expect reduced performance and worse fuel economy.

Get it diagnosed within a week. Checking actual fuel pressure with a gauge separates a sensor fault from a fuel delivery problem.

Severity

Moderate — Address SoonThis Week

Symptoms

  • •Check Engine Light on
  • •Reduced engine performance
  • •Increased fuel consumption
  • •Rough running or hesitation

Likely Causes

Faulty fuel rail pressure sensor50%

A failed sensor sends a low or erratic signal to the engine computer.

Wiring or connector problem30%

An open circuit, short to ground, or corroded connector in the sensor circuit can pull the signal low.

Actual low fuel pressure15%

A weak pump or restricted fuel supply can cause real low rail pressure that the sensor reports correctly.

Failed engine control module5%

RepairPal lists a PCM failure as a possible cause, though it is uncommon.

Estimated Cost

DIY Repair

$40–$250
Difficulty

DIY Friendly

Shop OBD2 scanners

Professional Repair

$150–$800

Includes parts + labor

Common Fixes

  1. Replace the fuel rail pressure sensor
  2. Repair wiring or connectors in the sensor circuit
  3. Test fuel pressure and replace the fuel pump or filter if low
  4. Replace or reprogram the PCM in rare cases

Shop Parts

Related Codes

Still have questions about P0192?

Continue with P0192

Next: add your vehicle and symptoms. Your code carries over.