Skip to content

P015B

Powertrain
Low

O2 Sensor Delayed Response - Lean to Rich Bank 1 Sensor 1

What could P015B mean for your vehicle?

Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.

Next: review your vehicle and symptoms. Your code carries over. No account needed to start.

P015B means the upstream oxygen sensor on bank 1 (the sensor before the catalytic converter on the side with cylinder 1) is slow to start responding when the air-fuel mixture changes from lean to rich. The engine computer watches how long the sensor takes to react when fuel is added after a fuel cut or during a test, and sets the code when that delay is too long.

An aging or contaminated sensor is the usual cause. Exhaust leaks ahead of the sensor, wiring faults, and mixture problems come next.

The car usually drives normally, but fuel economy and emissions can suffer, and a slow sensor makes the engine's fuel control less precise. Check for exhaust leaks first, then replace the sensor if nothing else is found.

Severity

Low — MonitorThis Month

Symptoms

  • •Check engine light on
  • •Often no noticeable symptoms
  • •Slightly worse fuel economy
  • •Rough idle or reduced performance in some cases
  • •Possible emissions test failure

Likely Causes

Aged or contaminated upstream oxygen sensorMost common

With age, or after exposure to oil, coolant or silicone, the sensor reacts late when the mixture swings from lean to rich.

Exhaust leak ahead of the sensorCommon

A leaking manifold gasket or flange lets outside air reach the sensor and blurs its response.

Wiring or connector problemLess common

Damaged wiring or a poor connection in the sensor circuit can slow the signal the computer sees.

Engine running rich or leanLess common

Vacuum leaks, injector problems or a faulty air flow sensor can upset the mixture and the sensor's test.

Engine computer softwareLess common

An engine computer that needs a software update can also set the code.

Estimated Cost

DIY Repair

$40–$200
Difficulty

DIY Friendly

Shop OBD2 scanners

Professional Repair

$150–$400

Includes parts + labor

Common Fixes

  1. Check for exhaust leaks ahead of the bank 1 sensor 1 oxygen sensor
  2. Inspect the sensor wiring and connector
  3. Replace the bank 1 sensor 1 oxygen sensor
  4. Look for and fix any mixture problem such as a vacuum leak
  5. Check for software updates for the engine computer

Shop Parts

Related Codes

Still have questions about P015B?

Continue with P015B

Next: add your vehicle and symptoms. Your code carries over.