P0068
MAP/MAF - Throttle Position Correlation
What could P0068 mean for your vehicle?
Add your vehicle to explore possible causes and next checks. AI guidance helps you investigate; it does not confirm a diagnosis.
P0068 means the engine computer found that the airflow measured by the manifold pressure (MAP) or mass air flow (MAF) sensor doesn't match what the throttle position says it should be. Each sensor can be fine on its own. The problem is that their readings don't agree.
The most common cause is an air leak after the throttle, such as a vacuum hose or intake gasket, which lets in more air than a nearly closed throttle should. A dirty throttle body or a sensor that reads wrong are next. On electronic throttle engines this check protects throttle control, so the engine often goes into reduced power.
Fix it soon, because reduced power mode can make merging and passing unsafe.
Severity
Symptoms
- •Check engine light on
- •Reduced power mode
- •Rough or unstable idle
- •Jerking or hesitation
Likely Causes
A leaking intake manifold gasket, vacuum hose or MAP hose lets in more air than the throttle position allows.
Carbon buildup changes how much air passes at a given throttle angle.
One sensor reads wrong even though its circuit is electrically fine.
Some manufacturers have released software updates for false P0068 codes.
Incorrect cam timing changes manifold vacuum and airflow.
Estimated Cost
Professional Repair
Includes parts + labor
Common Fixes
- Smoke-test the intake for vacuum leaks after the throttle
- Clean the throttle body and perform the throttle relearn
- Check MAF and MAP readings against expected values
- Check for a manufacturer software update
Shop Parts
Related Codes
Still have questions about P0068?
Continue with P0068Next: add your vehicle and symptoms. Your code carries over.